just another nerd on the interweb…
Looking for wolcmd for OS X - try here
Wake on Lan Command Line
The command line tool wolcmd is run
from a dos prompt. The syntax is as follows:
[mac address] [ip address]
[subnet mask] [port number]
you can also do a local broadcast if
you are running on an internal network thus
where mac address is the
unique address of the network card. To find the mac address of a card you
can either open the computer and read the address on the sticker on the
card or much easier is, if you are using TCP/IP, ping the machine from a
dos prompt (ping [machine name or ip number] i.e. ping delphi or ping
10.43.43.43) then issue an arp command (arp -a) which will list the ip
number and physical address of the card.
If the port number is not
specified it will default to port 7
Running from a batch file
Simply add multiple entries thus:
wolcmd 009027a324fe 184.108.40.206
wolcmd 009024a731da 220.127.116.11 255.255.255.0 8900
To run the batch file, say half an hour
before everybody gets into work, use the AT command on a Windows NT
The AT command schedules commands and
programs to run on a computer at a specified time and date. The Schedule
service must be running to use the AT command.
it look like
Wake On Lan Command Line is free.
© copyright 20/06/2013 - depicus | hello 18.104.22.168
I would love to change the world, but they won't give me the source code.